ICAM / OSCAM installation

OpenATV 6.4 or higher is required.

We recommend OpenATV 7.1 Download OpenATV 7.1 and an ARM 4k box.

---

If an Oscam iCAM version is already installed, uninstall the existing one.

1. Blue button — Extensions — Remove Plugins — Softcams
2. Select and uninstall oscamicam
3. Reboot box

---

Set settings only for OpenATV if necessary:

1. Menu button — Settings — Operation + interface — Extras / Customize system settings
2. Integrate ECM into HTTP streams – NO
3. Decrypt HTTP Streams – YES
4. Decrypt received HTTP streams – NO
5. Load bouquets not included – YES
6. save with the green button
7. Reboot box

---

Install OSCAM IPK.

OSCAM iCAM – V8 – ARM (4k box)Download

OSCAM iCAM – V8 – VUPLUS4K (4k VU+ Box)Download

OSCAM iCAM – V8 – MIPSEL (not 4k box)Download

Various other Oscam installations and instructions

1. Download the IPK and copy it to the /tmp folder on the box via FTP (e.g. Filezilla).
2. blue button — Extensions — IPK Installer
3. Select Storage TMP
4. Install extensions
5. Check IPK
6. and install with the green button
7. Reboot box
8. A new channel list “Sky DE iCAM” was automatically installed, the channels only become bright via this list

---

Select Oscam iCAM as default

1. blue button — softcam — set up softcam
2. select the oscamicam (with right left)
3. start with the yellow button
4. and save with the green button

---

Enter Oscam Line

1. open browser
2. http://IPDERBOX:8080
3. go to oscam.server under files
4. Insert reader (from email)
5. click save
6. restart oscam or box

---

Optional upload of picons

picons_iCAMDownload

1. Download the Picons iCAM zip file
2. Unzip the zip file
3. Copy the unzipped folder “picon” to “/usr/share/enigma2” via FTP

---

---

known problems

• Problem: OpenATV 7.0 on VU+ Oscam won’t start —- Solution: use OpenATV 7.1
• Problem: Freezer with two activated tuners (Twin Tuner Receiver) —- Solution: Activates only one tuner
• Problem: Installation stops — Solution: Uninstall Oscam first (see instructions at the very beginning)
• Problem: OSCAM installed but the channels don’t get bright — Solution: do a channel search

---

updates

• Uninstall old OSCAM iCAM
• Reboot box
• Install new OSCAM iCAM
• Reboot box
• insert reader
• Restart OSCAM